
Reliable, high-reserve power engineered for life on the open water and remote highways. From deep-discharge house battery banks and electric trolling motors to high-cranking marine propulsion, Empire Batteries delivers factory-direct Trojan, ODYSSEY, and LifeLine stock with dedicated regional route delivery across Oregon, Washington, and Idaho.
ESSENTIAL BATTERY KNOWLEDGE
Marine and recreational vehicle electrical demands are fundamentally different from standard automotive use. Understanding the distinctions between starting, dual-purpose, and deep cycle duty ensures your equipment never leaves you stranded.
High-Amperage Engine Ignition
Engineered with numerous thin sponge-lead plates to maximize surface area. Delivers massive cranking current (MCA / CCA) for 5 to 15 seconds to turn over outboard motors, inboard engines, and RV chassis blocks. Not designed for deep discharging—repeated cycling will rapidly degrade plate structures.

Marine Cranking Amps (MCA) · Cold Cranking Amps (CCA)
Starting + Auxiliary Deep Cycling
Constructed with medium-thickness plates and high-density paste. Provides strong cranking power alongside reliable cycling reserve. Ideal for single-battery vessels, ski boats, runabouts, and camper vans where physical battery compartment space cannot accommodate separate starting and house banks.

High MCA + Reserve Capacity (RC) · Semi-Traction Durability
Continuous Multi-Hour Discharge
Built with extra-thick solid lead plates engineered to discharge down to 50%–80% Depth of Discharge (DoD) repeatedly. Powers prolonged continuous electrical loads: refrigeration, inverters, freshwater pumps, entertainment, GPS navigation, and trolling motors.

Amp-Hour Capacity (Ah @ 20-Hr) · Deep Cycle Life Count
Total storage capacity over 20 hours. A 100 Ah battery reliably supplies 5 amps for 20 hours before reaching 10.5 volts.
Minutes a battery can supply 25 amps of continuous load at 80°F before battery voltage drops below safe operational levels.
The discharge current a battery can supply at 32°F (0°C) for 30 seconds while maintaining a minimum voltage of 7.2 volts.
Reinforced casing designs and internal epoxy bonding built to handle pounding ocean chop and washboard forest service roads.
HOW THEY WORK & TECHNOLOGY COMPARISON
Each battery chemistry balances upfront investment, cycle life, maintenance requirements, and charging characteristics differently. Here is how they operate and compare.
Best for: Budget-conscious RVers, travel trailers, and accessible ventilated compartments.
Thick cast antimony lead grids submerged in liquid electrolyte. Delivers the lowest initial cost per amp-hour. Requires regular distilled water inspection and an externally vented battery box.

· Lowest initial purchase cost
· 500 – 1,000 cycles @ 50% DoD
· Cell-by-cell hydrometer testing
· Requires periodic distilled water
Best for: Sailboats, cruisers, center consoles, and interior camper van compartments.
Electrolyte is immobilized in micro-fiberglass glass mats. Completely sealed, non-spillable, and maintenance-free. Outstanding vibration tolerance with very low self-discharge rates during off-season winter storage.

· 100% maintenance-free (zero watering)
· Completely spill-proof in any orientation
· Superior vibration resistance
· Slow off-season self-discharge
Best for: Boondocking RVs, overland rigs, and yachts cycling without 100% daily recharges.
Engineered with proprietary carbon additives that prevent plate sulfation in Partial State of Charge (PSoC). Eliminates the common premature failure caused by incomplete generator or solar top-offs.

· Up to 3x cycle life vs standard AGM
· Resists damage from partial charging
· Maintenance-free sealed construction
· High charge acceptance rate
OUR COMMERCIAL & RETAIL CAPABILITIES
With over five decades as the Pacific Northwest's leading battery distributor, we supply commercial marine yards, RV dealerships, commercial fleets, and private owners with unmatched technical support and reliable supply.
Warehouse inventory of Trojan, ODYSSEY Extreme, and LifeLine marine batteries in Tigard and Eugene. Guaranteed factory-fresh date codes and immediate wholesale availability.
Consultative electrical engineering to calculate daily amp-hour consumption, configure 6V/12V/24V/48V series-parallel banks, and match proper solar charge profiles and inverter ratings.
Dedicated commercial wholesale pricing, volume pallet discounting, and scheduled shop restocking programs for Northwest boatyards, marina service docks, and RV dealerships.
Company-owned trucks or LTL shipments delivering palletized batteries directly across Oregon, Washington, and Idaho. Instant invoice credits and certified EPA core disposal.
Contact our application specialists in Tigard (503-639-5515) or Eugene (541-953-7260) for power audits, battery bank sizing, wholesale pricing, and scheduled route delivery across the Northwest.